PowerMan Product Range

Features
Specifications

Model PM2100S

Capacity 1000VA/600W

Input

Voltage Range 230V AC ± 25%

Frequency Range 50HZ +- 10%

Output

Voltage Range 230V AC ± 25%

Frequency Range 50HZ +- 10%

Waveform Sine Wave

Output Battery

Battery Size 2 x 12V7.2Ah

Recharge Time 90% Capacity after 8 hours

Backup Time @ % Load || Max Load: 2.7 Amps

25% 15 m 50% 7 m 75% 3 m

General

Size 144mm x 345mm x 215mm

Weight 12.5 kgs

Software USB Management Software\

SNMP SNMP card optional extra

Battery Box

Size UPS has internal batteries

Warranty

Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.

Batteries The batteries carry a 3 months warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.

Microprocessor-based digital control
Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily
Pure sine wave output on inverter
Auto tracking of mains phase to ensure inverter output voltage is the same phase as mains input, reducing transfer time and peak surge on switch over
LCD Display with full system information
Input Voltage
Output Voltage
Frequency
Battery Voltage and Capacity
Load Level
Automatic self test on power up
Cold start facility
Automatic shut down on low battery to protect the battery and insure maximum life
Auto restart when mains power is restored after automatic shut down.
Intelligent battery management: battery temperature compensation to extend the battery life;
Three-stage charging to shorten recharge time (6 to 8 hours)
Automatic charging in OFF mode
Battery overcharge & over discharge protection
Short circuit, overload, surge protections built in
Automatic shut down on no load (Optional setting)
RS232 / USB communication port and RJ11 / RJ45 protection, includes
Unattended safety shut down
System alarm and auto Power-On / Off by RS232 or USB interface communicating with PC.

social media

quick links

contact info

newsletter

	Microprocessor-based digital control
	Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily
	Pure sine wave output on inverter
	Auto tracking of mains phase to ensure inverter output voltage is the same phase as mains input, reducing transfer time and peak surge on switch over
	LCD Display with full system information
	Input Voltage
	Output Voltage
	Frequency
	Battery Voltage and Capacity
	Load Level
	Automatic self test on power up
	Cold start facility
	Automatic shut down on low battery to protect the battery and insure maximum life
	Auto restart when mains power is restored after automatic shut down.
	Intelligent battery management: battery temperature compensation to extend the battery life;
	Three-stage charging to shorten recharge time (6 to 8 hours)
	Automatic charging in OFF mode
	Battery overcharge & over discharge protection
	Short circuit, overload, surge protections built in
	Automatic shut down on no load (Optional setting)
	RS232 / USB communication port and RJ11 / RJ45 protection, includes
	Unattended safety shut down
	System alarm and auto Power-On / Off by RS232 or USB interface communicating with PC.