PowerMan Product Range

Features
Specifications

Model PM2200

Capacity 2000VA/1200W

Input

Voltage Range 230V AC ± 25%

Frequency Range 50HZ ± 10%

Inverter Output

Voltage Range 230V AC ± 25%

Frequency Range 50HZ ± 10%

Waveform Stepped Sine Wave

Output Battery

Battery Size 2 x 12V9Ah

Recharge Time 90% Capacity after 8 hours

Backup Time @ % Load || Max Load: 5.4

25% 16 mins 50% 8 mins 75% 4 mins

General

Size 144mm x 410mm x 215mm

Weight 18.5 kgs kgs

Software USB Management Software

SNMP No

Warranty

Unit Units carry a 12-month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.

Batteries The batteries carry a 3 months warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.

State of the art microprocessor controlled main PCB, limits component count and improves reliability
Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily prolonging battery life
LED Display to easily determine the UPS status
Automatic self test on power up to ensure the UPS is working correctly
Cold start facility so that the unit can be powered up even when mains power is not available
Automatic shut down on low battery to protect the battery and insure maximum life
Auto restart when mains power is restored after automatic shut down
Intelligent battery management: battery temperature compensation to extend the battery life
Three-stage charging to shorten recharge time (6 to 8 hours)
Automatic charging in OFF mode
Battery overcharge & over discharge protection
Short circuit, overload, surge protections built in
Optional RS232 / USB communication port and RJ11 / RJ45 protection

social media

quick links

contact info

newsletter

	State of the art microprocessor controlled main PCB, limits component count and improves reliability
	Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily prolonging battery life
	LED Display to easily determine the UPS status
	Automatic self test on power up to ensure the UPS is working correctly
	Cold start facility so that the unit can be powered up even when mains power is not available
	Automatic shut down on low battery to protect the battery and insure maximum life
	Auto restart when mains power is restored after automatic shut down
	Intelligent battery management: battery temperature compensation to extend the battery life
	Three-stage charging to shorten recharge time (6 to 8 hours)
	Automatic charging in OFF mode
	Battery overcharge & over discharge protection
	Short circuit, overload, surge protections built in
	Optional RS232 / USB communication port and RJ11 / RJ45 protection